|
Do it yourself
| |||
| ||||
Replacing the Rear Bulb on an Opel Meriva B
Model: Vauxhall Meriva
MK 2, Meriva B
- Years 2010-2017
Locate the rear light with the burnt-out bulb that needs replacing. Open the rear hatch and remove the cover located behind the light. Identify the electrical connector and disconnect it. Locate the two plastic nuts securing the light unit and unscrew them. From outside the car, pull out the light unit, releasing the locking clips at the back of the light and removing it. Identify the burnt-out bulb, remove it, and replace it with a new one. Reattach the rear cover of the light unit and reposition the unit from outside. From inside the boot, reattach the two plastic nuts and reconnect the electrical connector. Finally, replace the plastic cover.
Updated on 18 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Meriva
(2003-2010 /
Meriva A, MK 1)
Want to replace the bulbs on your Opel Meriva? Here’s how to remove the front headlight bulbs. Locate the inspection cover at the back of the headlig…
Vauxhall Meriva
(2010-2017 /
MK 2, Meriva B)
Before you can start, open the front bonnet of your Opel Meriva. Begin by unhooking and removing the windscreen washer fluid filler tube. This will g…
Vauxhall Meriva
(2010-2017 /
MK 2, Meriva B)
When an Opel Meriva displays the code "error 20", it means the right main beam bulb needs replacing. To carry out the replacement, purchase an H7 bul…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.051
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
