Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on an Opel Crossland X

Model: Vauxhall Crossland X MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Warning light – error code

Video tutorial

If the service light appears on the dashboard of your new Opel Crossland X despite having already completed the regular service, don't worry as you can easily reset it manually using the following procedure. First, get inside the car and ensure it is completely off. Then, locate the button with a small spanner icon (located below the rev counter) and hold it down.

At the same time, turn on the ignition and wait for the automatic countdown to finish. Finally, release the button and turn off the ignition.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on an Opel Crossland X
How to Reset the "Service" Light on an Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) Before you begin, sit in the driver's seat of your Opel Crossland X. Start by pressing and holding the "check" button located on the instrument clust…
How to Reset the Service Light on the Opel Crossland X?
How to Reset the Service Light on the Opel Crossland X?
Vauxhall Crossland X (2017-2024 / MK 1) To reset the Service light on the Opel Crossland X, press and hold the CHECK button located in the centre of the instrument panel. While continuing t…
How to Reset the Service Light on the Opel Crossland X?
How to Reset the Service Light on the Opel Crossland X?
Vauxhall Crossland X (2017-2024 / MK 1) To reset the Service light on the Opel Crossland X, press and hold the CHECK button located in the centre of the instrument panel: while holding this…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos