Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Vivaro
    4. : How to reset the Vauxhall Vivaro service light

Vauxhall Vivaro - Video tutorial

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Instrument cluster
Operation: How to reset the Vauxhall Vivaro service light

To be able to manually reset the maintenance warning light that comes on on the instrument panel of your Opel Vivaro first series (year 2001-2014) you just need to implement the following procedure. First, get inside the car and make sure the ignition is off. Then hold down the accelerator pedal and start the ignition itself. At this point, press the brake pedal three consecutive times and keep it pressed too. Wait a few seconds and release both pedals as soon as the maintenance light goes out. Finally, turn off the ignition and you're done.


Posted on 22 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Vivaro 2014-2019 - What does the orange engine warning light on the Opel Vivaro indicate? Read Answer
    • Vivaro 2014-2019 - What does the AdBlue warning light on the Opel Vivaro 2 indicate? Read Answer
    • Vivaro 2014-2019 - How to reset the service on the Opel Vivaro? Read Answer
    • Vivaro 2001-2014 - What does the Vauxhall Vivaro serv light indicate? Read Answer
    • Vivaro 2001-2014 - What does the Vauxhall Vivaro serv light indicate? Read Answer
    • Vivaro 2014-2019 - What to do if the AdBlue light comes on in your Opel Vivaro? Read Answer
    • Vivaro 2014-2019 - What does the service light of the Opel Vivaro 2 indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos