Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Oil Light on an Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

To reset the oil light on a fourth-generation Opel Corsa, produced from 2006 to 2014, first briefly press the button located to the right of the speedometer to turn on the information display. Press it again and hold it down, then switch on the vehicle's instrument cluster without starting the engine.

You will see the word "insp" flashing on the dashboard. Continue to hold the speedometer button until the "insp" message stops flashing to complete the reset.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Warning Light on an Opel Corsa
How to Reset the Oil Warning Light on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Resetting the oil change light on your Opel Corsa is really very simple: first, however, you must have actually changed the oil in your vehicle! Turn…
Resetting the Service Light on the Opel Corsa
Resetting the Service Light on the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Follow these brief steps to reset the service light for the routine maintenance oil change on the Opel Corsa. First, get inside the vehicle and turn …
Resetting the Service Light on an Opel Corsa
Resetting the Service Light on an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Resetting the service light on an Opel Corsa and on Opel cars in general is extremely simple, and we will now demonstrate it. Turn on the instrument …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos