Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Opel Corsa F

Model: Vauxhall Corsa Corsa F - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

Today, with the help of the following video tutorial, follow the steps to reset the service light on the Opel Corsa F model. First, get in the vehicle and press the SET/CLR button located on the left stalk of the steering wheel.

Next, turn on the instrument cluster and wait, keeping the SET button pressed, until the countdown reaches 0; at that point, release the button. Finally, turn off and then turn on the ignition to check that the reset was performed correctly.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on an Opel Corsa C
How to Reset the Service Light on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) To reset the service light on the Opel Corsa C, use our video guide to avoid making mistakes. Start by getting in the Opel, closing all the doors, an…
How to reset the service light on the Opel Corsa model C
How to reset the service light on the Opel Corsa model C
Vauxhall Corsa (2000-2006 / Corsa C) Today we will explain how to reset the service light on the 2002 Opel Corsa model C. The reset should be done after performing car maintenance operat…
How to Reset the Service Light on an Opel Corsa
How to Reset the Service Light on an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) This brief video tutorial shows how to reset the service light on a fifth-generation Opel Corsa, produced from 2014 to 2019. First, turn on the vehic…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos