Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Zafira
    4. : Passenger compartment heating radiator

Vauxhall Zafira - Passenger compartment heating radiator

Vauxhall Zafira (1999-2005 / MK 1, Zafiraa, T98)
How to remove the heating radiator
The heating radiator is a component located in the front of the vehicle. The engine creates heat due to the internal combustion that occurs constantly inside …read all…
Posted on 2 August 2023 by ScegliAuto
Accelerator (1) Airbags (1) Alternator (5) Shock absorbers (2) Antenna (2) Car stereo (12) Anti roll bar (1) Roof Rack Bars (3) Battery (5) Bushings (2) Arm (2) Gearbox (1) Spark plugs (4) Bodywork (2) Glove box (3) Control unit (2) Key (10) Locking the trunk (2) Timing belt (7) V-belt (1) -board computer (4) Checks and maintenance (34) Oil pan (1) Dashboard (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (2) Cabin air filter (17) Petrol filter (1) Diesel filter (4) Oil filter (2) Clutch (3) Grille (1) Injectors (1) Accessory Kit (1) Light bulb (4) Side turn signal light bulb (2) Headlight bulb (19) Rear light bulb (9) Antifreeze liquid (1) Starter motor (5) Gear oil (1) Engine oil (5) Power steering oil (1) Door panel (18) Front bumper (2) Rear bumper (2) Brake pads (3) Hydraulic pistons (2) Tires (3) Gear Shift Knob (11) Pump (2) Fuel pump (5) Door (2) Window lift button (1) Instrument cluster (9) Radiator (3) Passenger compartment heating radiator (1) Wheel (1) Fuse box (37) Seat (7) Lock (1) Lambda sensor (1) Outside rearview mirror (7) Engine mount (1) Windscreen wipers (7) Thermostat (3) Engine head (2) Central tunnel (1) Turbine (2) Valve (1) EGR valve (4) Interior blower (2) Side window (1) Steering wheel (2)

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos