Do it yourself
Frequently asked questions about cars and motorcycles

Vauxhall Zafira - Valve

Vauxhall Zafira (2005-2011 / Zafirab, A05, MK 2)
How do you remove the EGR valve from the Opel Zafira?

In order to remove the EGR valve of the Opel Zafira, you need to open the hood so that you can access the components located inside the engine compartment: it …read all…
Posted on 3 August 2023 by ScegliAuto

Accelerator (1) Airbags (1) Alternator (5) Shock absorbers (2) Antenna (2) Car stereo (12) Anti roll bar (1) Roof Rack Bars (3) Battery (5) Bushings (2) Arm (2) Gearbox (1) Spark plugs (4) Bodywork (2) Glove box (3) Control unit (2) Key (10) Locking the trunk (2) Timing belt (7) V-belt (1) -board computer (4) Checks and maintenance (34) Oil pan (1) Dashboard (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (2) Cabin air filter (17) Petrol filter (1) Diesel filter (4) Oil filter (2) Clutch (3) Grille (1) Injectors (1) Accessory Kit (1) Light bulb (4) Side turn signal light bulb (2) Headlight bulb (19) Rear light bulb (9) Antifreeze liquid (1) Starter motor (5) Gear oil (1) Engine oil (5) Power steering oil (1) Door panel (18) Front bumper (2) Rear bumper (2) Brake pads (3) Hydraulic pistons (2) Tires (3) Gear Shift Knob (11) Pump (2) Fuel pump (5) Door (2) Window lift button (1) Instrument cluster (9) Radiator (3) Passenger compartment heating radiator (1) Wheel (1) Fuse box (37) Seat (7) Lock (1) Lambda sensor (1) Outside rearview mirror (7) Engine mount (1) Windscreen wipers (7) Thermostat (3) Engine head (2) Central tunnel (1) Turbine (2) Valve (1) EGR valve (4) Interior blower (2) Side window (1) Steering wheel (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos