Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 407
  6. : Diesel particulate filter

Peugeot 407 - Diesel particulate filter

Diesel Particulate Filter Peugeot 407 (2004-2012 / mk 1)

Peugeot 407 (2004-2012 / MK 1)
Disassembly of the particulate filter of the Peugeot 407 2.0 HDI

Below we will see the main instructions that will allow us to disassemble and replace the particulate filter of the Peugeot 47 2.0 HDI. First, we open the …Read all…
Posted on 20 March 2025 by ScegliAuto
Peugeot 407 (2004-2012 / MK 1)
How to Top Up the Additive to Reduce Particulate Emissions on the Peugeot 407

To top up the liquid needed for the particulate filter, follow this procedure: lift the rear of the car, as the refill tube is located just before the left …Read all…
Posted on 6 September 2026 by ScegliAuto

Airbag (1) Shocks (3) Car stereo (10) Battery (1) Transmission (1) Glow plugs (1) Control unit (3) Key (5) Timing belt (4) Air conditioner (1) Onboard computer (1) Checks and maintenance (10) Dashboard (1) CV boot (1) Bearing (1) Brake rotors (1) Headlight (1) Tail light (2) Diesel particulate filter (2) Air filter (3) Cabin air filter (6) Oil filter (1) Parking brake (1) Window switch (1) Light bulb (1) Side marker bulb (1) Headlight bulb (2) Tail light bulb (1) Interior dome light bulb (1) License plate light (1) (1) Handle (1) Power window motor (1) Starter motor (3) Power steering fluid (1) Clock (6) Door trim panel (6) Front bumper (3) Rear bumper (1) Brake pads (2) Shift knob (4) Fuel pump (2) Car door (2) Push button (1) Instrument cluster (1) Fuse box (21) Suspension system (2) Side mirror (4) Warning light – error code (4) Tire pressure warning light (1) Service warning light (25) Fuel cap (2) Windshield wipers (1) Turbocharger (1) EGR valve (2) Blower motor (6) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos