Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Additive to Reduce Particulate Emissions on the Peugeot 407

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Diesel particulate filter

Video tutorial

To top up the liquid needed for the particulate filter, follow this procedure: lift the rear of the car, as the refill tube is located just before the left rear axle. Once you locate the tubing, disconnect the connection and attach the appropriate filling kit using a canister of additive.

Then, take the canister, connect it to the filling kit, and turn it upside down to facilitate filling the system. Once the system is filled, disconnect the kit and reattach the vehicle's feed tube.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Peugeot 407
How to Replace the Timing Belt on a Peugeot 407
Peugeot 407 (2004-2012 / MK 1) To replace the timing belt on a Peugeot 407, access the engine bay and remove the left side cover of the engine block. You will also need to remove t…
How to Replace the Front Window Regulator on a Peugeot 407?
How to Replace the Front Window Regulator on a Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) To replace the window regulator on a Peugeot 407, first loosen the screws that secure the corresponding door panel: these screws are located under th…
Replacing the cabin air filter in the Peugeot 407
Replacing the cabin air filter in the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) To ensure that the air conditioning system in the Peugeot 407 always distributes clean air in the cabin, replace the dedicated filter at the interval…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos