Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Window Regulator on a Peugeot 407?

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

Video tutorial

To replace the window regulator on a Peugeot 407, first loosen the screws that secure the corresponding door panel: these screws are located under the trim around the internal handle, near the window switch, and on the side of the panel. The window switch will then need to be disconnected to remove the panel: once the panel is removed, you can loosen the screws securing the window regulator at the top and bottom, completely removing it and replacing it with a new part.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

Peugeot 407 (2004-2012 / MK 1) In this video guide, we will observe, indirectly, how to disassemble the rear side window of the Peugeot 407 and, if desired, the window regulator me…
Peugeot 407 (2004-2012 / MK 1) The window mechanism of the rear door of the Peugeot 407 can only be accessed by removing the inner trim panel of the door. Setting aside the specifi…
Peugeot 407 (2004-2012 / MK 1) To replace the timing belt on a Peugeot 407, first lift the car using a ramp and remove the front right wheel. This will allow you to take off the pl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos