Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Handle of a Peugeot 407

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Handle

Video tutorial

Removing the external handle of a Peugeot 407. Open the car door; unscrew the screw located at the side of the door as shown in the video, remove the left cover of the handle, then slide the handle to the left of the door. Remove the door opening handle and extract the lock from the door.

Compare the removed handle with the new handle to be fitted. Insert the new handle with the lock and its cover into the door.

Finally, test the correct fitting and operation (by manually operating the handle).


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel to Access the Speaker of a Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Learn how to remove the speaker located in the door panel of a Peugeot 407. Before starting the disassembly, disconnect the battery terminals located…
Disassembly of the front door panel of the Peugeot 407.
Disassembly of the front door panel of the Peugeot 407.
Peugeot 407 (2004-2012 / MK 1) Below we will see the information that will allow us to disassemble the front door panel of the Peugeot 407. First, we open the front door of the veh…
How do you remove the rear door and window in the Peugeot 407?
How do you remove the rear door and window in the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) In this video guide, we will observe, indirectly, how to disassemble the rear side window of the Peugeot 407 and, if desired, the window regulator me…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos