Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the actuator of the sliding door on the Peugeot 1007?

Model: Peugeot 1007 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Car door

Video tutorial

In order to replace the door actuator on the Peugeot 1007, you will need to completely remove the inner panel of the sliding door: once the fixing screws of this panel have been loosened, it will be possible to completely detach it and access the underlying components.

Here it will be possible to loosen the screws that secure the actuator to its seat, also disconnecting the corresponding cable: the new actuator can then be inserted into its seat, securing it with the appropriate screws and then covering everything with the panel just removed.


Posted on 2 April 2025 by ScegliAuto


Related tutorials

What is the Procedure to Reset the Sunroof on the Peugeot 1007?
What is the Procedure to Reset the Sunroof on the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) The tips listed here for resetting the sunroof of the Peugeot 1007 are applicable not only to this vehicle but to any model. When you cannot achieve …
How do you open the sliding doors of the Peugeot 1007?
How do you open the sliding doors of the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) The sliding doors of the Peugeot 1007 can be opened after the car locks have been unlocked using the opening button on the remote control: once the l…
How do you reset the sliding door of the Peugeot 1007?
How do you reset the sliding door of the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) When problems related to the operation of the sliding door occur on the Peugeot 1007, it is possible that the vehicle's battery is not sufficiently c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos