Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front seat of the Peugeot 1007

Model: Peugeot 1007 MK 1 - Years 2005-2010
Part: Seat

Today we will discover the instructions that will allow us to disassemble and replace the front seat of the Peugeot 1007. First, we open the front door of the car and start unscrewing all the fixing screws we find on the front seat guides, moving it back and forth; then we disconnect the electrical connector found underneath, removing it from the cabin, as shown in the video. At this point, we carry out the repair or replacement of the front seat, fixing it correctly and finally adjusting the seating position!

Posted on 10 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on the Peugeot 1007
How to Replace the Cabin Filter on the Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) In this guide for your Peugeot 1007, you will discover where the cabin air filter is located and how to replace it quickly and safely. First, turn of…
How to replace the cabin air filter of the Peugeot 1007
How to replace the cabin air filter of the Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) If you want to replace the cabin air filter of your Peugeot 1007 by yourself, just read the following guide and follow all the described steps. First…
How do you reset the sliding door of the Peugeot 1007?
How do you reset the sliding door of the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) When problems related to the operation of the sliding door occur on the Peugeot 1007, it is possible that the vehicle's battery is not sufficiently c…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos