Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on the Peugeot 1007

Model: Peugeot 1007 MK 1 - Years 2005-2010
Part: Cabin air filter

In this guide for your Peugeot 1007, you will discover where the cabin air filter is located and how to replace it quickly and safely. First, turn off your Peugeot 1007 completely and lift the bonnet. Then, locate the box situated at the top of the engine compartment and remove the cover by hand. Finally, locate the cabin air filter and remove it. Replace it with a new filter and correctly refit the cover of the box that was removed earlier.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the sliding door of the Peugeot 1007?
How do you reset the sliding door of the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) When problems related to the operation of the sliding door occur on the Peugeot 1007, it is possible that the vehicle's battery is not sufficiently c…
How to replace the cabin air filter of the Peugeot 1007
How to replace the cabin air filter of the Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) If you want to replace the cabin air filter of your Peugeot 1007 by yourself, just read the following guide and follow all the described steps. First…
Replacing the Timing Belt on a Peugeot 1007 1.6 E
Replacing the Timing Belt on a Peugeot 1007 1.6 E
Peugeot 1007 (2005-2010 / MK 1) In this video guide, you will see instructions on how to remove and replace the timing belt on a Peugeot 1007 1.6 E. First, lift the vehicle and remo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos