Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Peugeot 1007 MK 1 - Years 2005-2010
Part: Cabin air filter

The cabin air filter is located in the engine bay, just below the windscreen, on the passenger side, directly beneath the wiper blade; to replace the filter, open the front bonnet and access the cover of the filter housing and remove it (it simply pulls off as it is clipped in place); then unclip the filter retaining tab and remove the filter from its housing, clean any debris, and insert the new filter (activated carbon type is recommended), ensuring it is oriented according to the direction of the airflow.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front seat of the Peugeot 1007
How to remove the front seat of the Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the front seat of the Peugeot 1007. First, we open the front do…
Replacement of Cabin Pollen Filter
Replacement of Cabin Pollen Filter
Peugeot 1007 (2005-2010 / MK 1) First, locate the position of the pollen filter housing, which, in this case, is found in the engine bay, under the windscreen on the passenger side.…
Replacing the Timing Belt on a Peugeot 1007 1.6 E
Replacing the Timing Belt on a Peugeot 1007 1.6 E
Peugeot 1007 (2005-2010 / MK 1) In this video guide, you will see instructions on how to remove and replace the timing belt on a Peugeot 1007 1.6 E. First, lift the vehicle and remo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos