Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Third Brake Light on Toyota RAV 4

Model: Peugeot 1007 MK 1 - Years 2005-2010
Part:

Learn how to remove the third brake light of the Toyota RAV 4 to replace it or change the bulbs inside. Lift the tailgate, remove the plastic cover around the perimeter of the tailgate using a screwdriver, and unscrew the screws inside it. Detach the spoiler with the third light from the metal panel. Once the light is free from any constraints, you can detach it from the spoiler (unscrew the screws and disconnect the relevant power connectors). Finally, install the new light: connect the power connector, insert the light into the spoiler, and screw in the securing screws.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Motor on a Peugeot 1007
How to Remove the Door Motor on a Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) To remove the door motor on a Peugeot 1007, first disconnect the battery terminals located in the engine compartment. Use a lever or screwdriver to r…
How to Activate the Auto-Locking Central Locking on a Peugeot 1007
How to Activate the Auto-Locking Central Locking on a Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) In this video, you will learn how to activate the auto-locking central locking on a Peugeot 1007: these automatic locks enhance security as this anti…
Replacing the Battery in a Peugeot 1007
Replacing the Battery in a Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) In this video tutorial, you will learn how to remove and replace the battery in a Peugeot 1007. First, open and lift the bonnet; then remove the plas…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos