Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Motor on a Peugeot 1007

Model: Peugeot 1007 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

Video tutorial

To remove the door motor on a Peugeot 1007, first disconnect the battery terminals located in the engine compartment. Use a lever or screwdriver to remove the handle cover, then unscrew the screws located there.

Unscrew the remaining screws on the door panel and detach the securing clips. Remove the door panel by hand, then use a screwdriver to unscrew the securing screws of the door actuator motor.

Disconnect the motor and replace it with a new one. Reassemble everything in reverse order.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Repair the Sliding Door on a Peugeot 1007
How to Repair the Sliding Door on a Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) This guide will show you the steps to repair the sliding door on a Peugeot 1007, following the instructions below. The sliding door on this vehicle i…
How do you reset the sliding door of the Peugeot 1007?
How do you reset the sliding door of the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) When problems related to the operation of the sliding door occur on the Peugeot 1007, it is possible that the vehicle's battery is not sufficiently c…
How to Replace the Cabin Filter on the Peugeot 1007
How to Replace the Cabin Filter on the Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) In this guide for your Peugeot 1007, you will discover where the cabin air filter is located and how to replace it quickly and safely. First, turn of…

Other guides you may be interested in

How to Set the Time on the Central Display of the Toyota Yaris

Today, let's look at the instructions for adjusting the clock on the central display of the Toyota Yaris. First, get in the vehicle and turn on the instrument panel; then press and hold the button located to the right of the panel (next to the clock) until the time display starts to flash, as shown in the video. Now adjust the hour first, followed by the minutes, using the same button; finally, exit the time setting to save all changes made!

Watch the video!


by ScegliAuto

More videos