Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in a Peugeot 1007

Model: Peugeot 1007 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Battery

Video tutorial

In this video tutorial, you will learn how to remove and replace the battery in a Peugeot 1007. First, open and lift the bonnet; then remove the plastic cover of the battery and disconnect the two terminals (positive and negative) by unscrewing the screws with an 8 mm spanner.

Next, remove the side control unit and unclip the battery holder levers found at the bottom: now you can pull upwards and extract the battery.

Finally, replace it with a new one of the correct type and refit it by reversing the procedure!


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on the Peugeot 1007
How to Replace the Cabin Filter on the Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) In this guide for your Peugeot 1007, you will discover where the cabin air filter is located and how to replace it quickly and safely. First, turn of…
How do you reset the sliding door of the Peugeot 1007?
How do you reset the sliding door of the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) When problems related to the operation of the sliding door occur on the Peugeot 1007, it is possible that the vehicle's battery is not sufficiently c…
Replacing the Timing Belt on a Peugeot 1007 1.6 E
Replacing the Timing Belt on a Peugeot 1007 1.6 E
Peugeot 1007 (2005-2010 / MK 1) In this video guide, you will see instructions on how to remove and replace the timing belt on a Peugeot 1007 1.6 E. First, lift the vehicle and remo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos