Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Peugeot 1007

Model: Peugeot 1007 MK 1 - Years 2005-2010
Part: Cabin air filter

If you want to replace the cabin air filter of your Peugeot 1007 by yourself, just read the following guide and follow all the described steps. First of all, start by lifting the front hood of the car completely, then correctly position the safety support and locate the protective cover located on the top of the engine compartment, specifically on the left side. Once located, remove it with your own hands and proceed with replacing the old cabin air filter with a new one of the same type.

Posted on 16 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on the Peugeot 1007
How to Replace the Cabin Filter on the Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) In this guide for your Peugeot 1007, you will discover where the cabin air filter is located and how to replace it quickly and safely. First, turn of…
How do you program the key of the Peugeot 1007?
How do you program the key of the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) In order to program the key of the Peugeot 1007, you need to insert the blank key into the corresponding slot: once this is done, you can proceed by …
What is the Procedure to Reset the Sunroof on the Peugeot 1007?
What is the Procedure to Reset the Sunroof on the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) The tips listed here for resetting the sunroof of the Peugeot 1007 are applicable not only to this vehicle but to any model. When you cannot achieve …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos