Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you open the sliding doors of the Peugeot 1007?

Model: Peugeot 1007 MK 1 - Years 2005-2010
Part: Car door

The sliding doors of the Peugeot 1007 can be opened after the car locks have been unlocked using the opening button on the remote control: once the locks have been unlocked, it will be possible to press the appropriate buttons always present on the remote control to open the sliding doors. These can be closed by pressing the same button again; the doors can also be opened by pulling the external handle. By doing this, it will be noticed that the doors will slide automatically.

Posted on 16 February 2025 by ScegliAuto

Video tutorial

Related tutorials

The Definitive Solution to Electric Door Problems on the Peugeot 1007
The Definitive Solution to Electric Door Problems on the Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) In this video, you will see the definitive solution to the many problems that the electric doors of the Peugeot 1007 have caused over the years: the …
How to Reset the Sliding Door on a Peugeot 1007?
How to Reset the Sliding Door on a Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) The Peugeot 1007 is exactly the car shown in the video, which features automatic opening and closing of its two sliding doors by pressing a button. I…
Problems and solutions for the sliding doors of the Peugeot 1007
Problems and solutions for the sliding doors of the Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) Let's see what are the main problems of the sliding doors of the Peugeot 1007: the most common is the electrical problem, where the dedicated control…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos