Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Sliding Door on a Peugeot 1007?

Model: Peugeot 1007 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Car door

Video tutorial

To repair the sliding door on a Peugeot 1007, you need to disassemble the components that may be damaged. Start by opening the door and loosening the nuts on the front brackets that allow it to slide.

Next, loosen the screws securing the internal protective panel of the door, detach it, and access the underlying components. The door mechanism can now be removed by loosening the screws that secure it, and the bearings on the brackets can also be replaced.

This should restore the door to proper working order.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Repair the Sliding Door on a Peugeot 1007
How to Repair the Sliding Door on a Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) This guide will show you the steps to repair the sliding door on a Peugeot 1007, following the instructions below. The sliding door on this vehicle i…
How do you reset the sliding door of the Peugeot 1007?
How do you reset the sliding door of the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) When problems related to the operation of the sliding door occur on the Peugeot 1007, it is possible that the vehicle's battery is not sufficiently c…
How do you replace the sliding door actuator on a Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) It will be possible to replace the actuator inside the door of the Peugeot 1007 by completely removing the inner panel of the sliding door: once all …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos