Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear door and window in the Peugeot 407?

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Car door

Video tutorial

In this video guide, we will observe, indirectly, how to disassemble the rear side window of the Peugeot 407 and, if desired, the window regulator mechanism. It starts with removing all the internal components of the door, handle, window regulator switch, speaker, and then concluding with the removal of the perimeter fasteners of the trim panel, which needs to be pulled and removed.

Once this is done, the protective film is removed, allowing access to the inside of the door for disassembling and removing the window regulator mechanism, after disconnecting it electrically, and then concluding with extracting the side glass from the guides.


Posted on 2 April 2025 by ScegliAuto


Related tutorials

To repair the window lift, how do you remove the rear door panel of the Peugeot 407?
To repair the window lift, how do you remove the rear door panel of the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) The window mechanism of the rear door of the Peugeot 407 can only be accessed by removing the inner trim panel of the door. Setting aside the specifi…
How to reset the window regulator of the Peugeot 407?
How to reset the window regulator of the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) To reset the window regulator of the Peugeot 407, turn on the instrument panel by inserting the ignition key into the corresponding lock. Once powere…
How to Replace the Front Window Regulator on a Peugeot 407?
How to Replace the Front Window Regulator on a Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) To replace the window regulator on a Peugeot 407, first loosen the screws that secure the corresponding door panel: these screws are located under th…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos