Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the headlight bulb of the Peugeot Satelis 125?

Model: Peugeot Satelis 125
Part: Headlight bulb

Video tutorial

To replace the headlight bulb of the Peugeot Satelis 125, you need to loosen the screws that secure the front panel of the motorcycle's front fairing. Once this panel is freed from the screws, you can remove it and locate the screws underneath that hold the headlight in its housing.

Once the headlight is completely freed, you can pull the bulb out from the back. Then, you can insert the new bulb, reposition the headlight, and secure it with the appropriate screws.


Posted on 30 December 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp of the Peugeot Satelis 125?
How to Replace the Front Headlamp of the Peugeot Satelis 125?
Satelis 125 To replace the front headlamp of the Peugeot Satelis 125, loosen the screws that secure the front fairing to its housing: these are located near the …
How to Replace the Battery on the Peugeot Satelis 125
How to Replace the Battery on the Peugeot Satelis 125
Satelis 125 You can replace the battery on the Peugeot Satelis 125 by loosening the screw located at the front of the motorcycle seat: once this screw is removed…
How do you program the key of the Peugeot Satelis 125?
How do you program the key of the Peugeot Satelis 125?
Satelis 125 In order to program the key of the Peugeot Satelis 125, you need to connect the diagnostic tool to the OBD port of the corresponding vehicle: this po…

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos