Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. : Satelis 125

Peugeot Satelis 125 - Video guides

Peugeot Satelis 125
How to replace the stator on a Peugeot Satelis 125
In this guide, discover the instructions that will allow you to dismantle and replace the stator of the Peugeot Satelis 125 scooter. First, place the scooter …Read all…
Posted on 5 October 2026 by ScegliAuto
Peugeot Satelis 125
How to Replace the Battery on the Peugeot Satelis 125
You can replace the battery on the Peugeot Satelis 125 by loosening the screw located at the front of the motorcycle seat: once this screw is removed, you can …Read all…
Posted on 20 July 2026 by ScegliAuto
Peugeot Satelis 125
How to Replace the Rear Brake Pads on a Peugeot Satelis 125?
You can replace the rear brake pads on a Peugeot Satelis 125 by loosening the screws that secure the brake caliper to the corresponding disc, allowing you to …Read all…
Posted on 20 May 2026 by ScegliAuto
Peugeot Satelis 125
How do you replace the headlight bulb of the Peugeot Satelis 125?
To replace the headlight bulb of the Peugeot Satelis 125, you need to loosen the screws that secure the front panel of the motorcycle's front fairing. Once …Read all…
Posted on 30 December 2025 by ScegliAuto
Peugeot Satelis 125
How do you replace the fairing of the Peugeot Satelis 125?
In order to replace the fairing of the Peugeot Satelis 125, you need to loosen the screws of the specific panels that make it up, so that it is then possible …Read all…
Posted on 8 November 2025 by ScegliAuto
Peugeot Satelis 125
How do you disassemble the engine of the Peugeot Satelis 125?
To disassemble the engine of the Peugeot Satelis 125, you will need to loosen the screws that hold the engine to its housing in the central lower part of the …Read all…
Posted on 4 October 2025 by ScegliAuto
Peugeot Satelis 125
How do you replace the exhaust pipe of the Peugeot Satelis 125?
In order to replace the exhaust installed on board the Peugeot Satelis 125, you will need to loosen the screws that secure the component to its housing: the …Read all…
Posted on 21 September 2025 by ScegliAuto
Peugeot Satelis 125
How do you replace the exhaust pipe of the Peugeot Satelis 125?
It will be possible to replace the exhaust pipe installed on the Peugeot Satelis 125 by loosening the screws that fix the component to its housing: the latter …Read all…
Posted on 3 September 2025 by ScegliAuto
Peugeot Satelis 125
How do you replace the air filter of the Peugeot Satelis 125?
To replace the air filter installed on the Peugeot Satelis 125, you will need to loosen the screws that secure the filter box located near the rear wheel. Once …Read all…
Posted on 11 July 2025 by ScegliAuto
Peugeot Satelis 125
Reasons why a Peugeot Satelis may turn off while accelerating
Why can a Peugeot Satelis scooter systematically turn off during acceleration? The reasons can be many: a dirty or clogged carburetor (if it is not fuel …Read all…
Posted on 27 June 2025 by ScegliAuto
Peugeot Satelis 125
What to do if the Peugeot Satelis 125 does not catch the counterplate
The problem of the starter motor not engaging can occur, so first we need to check if the battery is discharged or weak (it should not drop below 10V during …Read all…
Posted on 4 June 2025 by ScegliAuto
Peugeot Satelis 125
How do you disassemble the engine of the Peugeot Satelis 125?
It will be possible to disassemble the engine of the Peugeot Satelis 125 by loosening the screws that secure the block to its housing in the central lower part …Read all…
Posted on 25 May 2025 by ScegliAuto
Peugeot Satelis 125
How do you replace the stator of the Peugeot Satelis 125?
It will be possible to replace the stator of the Peugeot Satelis 125 by loosening the screws that secure the stator cover panel, located on the right side of …Read all…
Posted on 7 May 2025 by ScegliAuto
Peugeot Satelis 125
How do you replace the gearbox oil of the Peugeot Satelis 125?
In order to replace the gearbox oil of the Peugeot Satelis 125, you need to loosen the drain plug of the transmission cup: this plug will be located on the …Read all…
Posted on 6 May 2025 by ScegliAuto
Peugeot Satelis 125
How do you replace the motor oil of the Peugeot Satelis 125?
The operation of replacing the engine oil on the Peugeot Satelis 125 can be done by loosening the drain plug of the oil pan located in the central lower part …Read all…
Posted on 8 April 2025 by ScegliAuto
Peugeot Satelis 125
How do you replace the variator of the Peugeot Satelis 125?
In order to replace the variator of the Peugeot Satelis 125, you need to loosen the screws that fix the transmission casing, located on the left side of the …Read all…
Posted on 21 February 2025 by ScegliAuto
Peugeot Satelis 125
How do you program the key of the Peugeot Satelis 125?
In order to program the key of the Peugeot Satelis 125, you need to connect the diagnostic tool to the OBD port of the corresponding vehicle: this port can be …Read all…
Posted on 14 December 2024 by ScegliAuto
Peugeot Satelis 125
How to Adjust the Timing Chain on the Peugeot Satelis 125?
To adjust the timing chain on the Peugeot Satelis 125, loosen the bolts securing the cylinder head at the top of the cylinder to remove it completely. Once the …Read all…
Posted on 5 November 2026 by ScegliAuto
Peugeot Satelis 125
How to Replace the Cylinder on the Peugeot Satelis?
To replace the cylinder on the Peugeot Satelis, loosen the screws securing the fairings around the engine block, specifically those at the front of the …Read all…
Posted on 21 October 2026 by ScegliAuto
Peugeot Satelis 125
How to Replace the Lambda Sensor on a Peugeot Satelis 125
To replace the lambda sensor on the Peugeot Satelis 125, loosen the screws securing the cover panel on the right side of the footwell, allowing it to be …Read all…
Posted on 3 October 2026 by ScegliAuto

See also:

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos