Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To disassemble the engine of the Peugeot Satelis 125, you will need to loosen the screws that hold the engine to its housing in the central lower part of the vehicle: you will also need to loosen the screws securing the manifolds and disconnect all the cables connected to the engine. At this point, you can proceed by loosening the cylinder head and cylinder from their seat: you will need to free the piston from the corresponding connecting rod in order to access the crankshaft and possibly replace all the components. Finally, you can close the engine block again and verify its operation.

Posted on 4 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Peugeot Satelis 125?
How do you disassemble the engine of the Peugeot Satelis 125?
Satelis 125 It will be possible to disassemble the engine of the Peugeot Satelis 125 by loosening the screws that secure the block to its housing in the central …
How do you program the key of the Peugeot Satelis 125?
How do you program the key of the Peugeot Satelis 125?
Satelis 125 In order to program the key of the Peugeot Satelis 125, you need to connect the diagnostic tool to the OBD port of the corresponding vehicle: this po…
How do you replace the engine oil of the Peugeot Satelis 125?
How do you replace the engine oil of the Peugeot Satelis 125?
Satelis 125 In order to replace the engine oil of the Peugeot Satelis 125, you need to loosen the drain plug located at the bottom of the motorcycle so that all …

How to replace the engine oil and oil filter of the Kawasaki ZR 7

This guide will show you how to replace the engine oil and oil filter while performing the routine maintenance service on the Kawasaki ZR 7 motorcycle. First, place your motorcycle on the centre stand and start by loosening the oil drain bolt, allowing the oil to drain into a container for about ten minutes. Then, use the appropriate spanner to unscrew and replace the oil filter cartridge with a new one, as shown in the video. At this point, unscrew the filler cap and pour in the suitable oil for your engine, as indicated in your motorcycle's manual!

Watch the video!


by ScegliAuto

More videos