Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to disassemble the engine of the Peugeot Satelis 125 by loosening the screws that secure the block to its housing in the central lower part of the frame: the fixing screws of the manifolds will also need to be removed and all the cables connected to the engine must be disconnected. At this point, it will be possible to proceed by loosening the cylinder head and the cylinder from their seat: the piston must be freed from the corresponding connecting rod in order to access the crankshaft and possibly replace all the necessary components. Finally, the engine block can be closed again to verify that everything is functioning properly.

Posted on 25 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Peugeot Satelis 125?
How do you disassemble the engine of the Peugeot Satelis 125?
Satelis 125 To disassemble the engine of the Peugeot Satelis 125, you will need to loosen the screws that hold the engine to its housing in the central lower par…
How do you replace the stator of the Peugeot Satelis 125?
How do you replace the stator of the Peugeot Satelis 125?
Satelis 125 It will be possible to replace the stator of the Peugeot Satelis 125 by loosening the screws that secure the stator cover panel, located on the right…
How do you replace the engine oil of the Peugeot Satelis 125?
How do you replace the engine oil of the Peugeot Satelis 125?
Satelis 125 In order to replace the engine oil of the Peugeot Satelis 125, you need to loosen the drain plug located at the bottom of the motorcycle so that all …

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos