|
Do it yourself
| |||
| ||||
How to Replace the Lambda Sensor on a Peugeot Satelis 125
Model: Peugeot Satelis 125
Video tutorial
To replace the lambda sensor on the Peugeot Satelis 125, loosen the screws securing the cover panel on the right side of the footwell, allowing it to be completely removed. Once the trim is detached, you can locate the underlying lambda sensor. Disconnect it from the corresponding connector to insert the new one into its place. After replacing the sensor, cover everything back up with the panel and check its operation.
Updated on 3 October 2026 by ScegliAuto
Related tutorials
Satelis 125
It will be possible to replace the stator of the Peugeot Satelis 125 by loosening the screws that secure the stator cover panel, located on the right…
Satelis 125
In order to replace the variator of the Peugeot Satelis 125, you need to loosen the screws that fix the transmission casing, located on the left side…
Satelis 125
To replace the variator on a Peugeot Satelis 125, loosen the securing bolts of the cover located near the rear wheel on the left side of the scooter.…
|
How to Replace the Exhaust on an Aprilia Sportcity 250
To replace the exhaust on an Aprilia Sportcity 250, loosen the screws that secure the exhaust to its housing: these screws will be located at the bottom and top of the exhaust. Once the support screws are loosened, remove the retaining ring that connects the exhaust to the remaining part of the exhaust pipe. Now, the old exhaust can be completely removed from its housing and replaced with a new spare part; after replacement, check that everything functions correctly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
