Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Why can a Peugeot Satelis scooter systematically turn off during acceleration? The reasons can be many: a dirty or clogged carburetor (if it is not fuel injected) or if it is fuel injected, a faulty fuel pump. A common problem for both versions could be a dirty or clogged fuel filter, in which case cleaning it may be sufficient. If there is an air leak between the carburetor and the cylinder head, it could be a problem related to a broken gasket or a loose screw. It could also be just a dirty or worn spark plug, in which case simply replacing it may solve the issue, or the problem could be with the coil, lacking spark when the engine revs increase. It could also be a problem with the alternator battery, which should be tested with a multimeter.

Posted on 27 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the motor oil of the Peugeot Satelis 125?
How do you replace the motor oil of the Peugeot Satelis 125?
Satelis 125 The operation of replacing the engine oil on the Peugeot Satelis 125 can be done by loosening the drain plug of the oil pan located in the central lo…
How do you replace the variator of the Peugeot Satelis 125?
How do you replace the variator of the Peugeot Satelis 125?
Satelis 125 In order to replace the variator of the Peugeot Satelis 125, you need to loosen the screws that fix the transmission casing, located on the left side…
How do you replace the gearbox oil of the Peugeot Satelis 125?
How do you replace the gearbox oil of the Peugeot Satelis 125?
Satelis 125 In order to replace the gearbox oil of the Peugeot Satelis 125, you need to loosen the drain plug of the transmission cup: this plug will be located …

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos