Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The operation of replacing the engine oil on the Peugeot Satelis 125 can be done by loosening the drain plug of the oil pan located in the central lower part of the vehicle: once the plug has been completely removed, the used oil can be drained into a properly positioned container. Once all the oil has been drained, the filter located between the rear swingarm and exhaust terminal can also be removed: at this point, a top-up will be necessary. The necessary amount of oil can be poured through the filler cap located on the bottom right side of the vehicle.

Posted on 7 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Peugeot Satelis 125?
How do you replace the engine oil of the Peugeot Satelis 125?
Satelis 125 In order to replace the engine oil of the Peugeot Satelis 125, you need to loosen the drain plug located at the bottom of the motorcycle so that all …
How to Change the Engine Oil on a Peugeot Satelis 125 Scooter
How to Change the Engine Oil on a Peugeot Satelis 125 Scooter
Satelis 125 How to change the engine oil on a Peugeot Satelis 125 scooter. Follow these steps for maintenance. Secure the scooter on the centre stand; use a hex …
How do you replace the gearbox oil of the Peugeot Satelis 125?
How do you replace the gearbox oil of the Peugeot Satelis 125?
Satelis 125 In order to replace the gearbox oil of the Peugeot Satelis 125, you need to loosen the drain plug of the transmission cup: this plug will be located …

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos