Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exhaust pipe of the Peugeot Satelis 125?

Model: Peugeot Satelis 125
Part: Exhaust muffler

Video tutorial

It will be possible to replace the exhaust pipe installed on the Peugeot Satelis 125 by loosening the screws that fix the component to its housing: the latter will be located near the rear wheel, on the right side of the motorcycle. Once the fixing screws of the component have been unscrewed, you can proceed by widening the connecting clamp positioned between the exhaust pipe and the collector.

In this way, it will be possible to insert the new replacement part to fix and connect it properly: then it will be possible to verify that everything works.


Posted on 3 September 2025 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Peugeot Satelis 125?
How do you replace the exhaust pipe of the Peugeot Satelis 125?
Satelis 125 In order to replace the exhaust installed on board the Peugeot Satelis 125, you will need to loosen the screws that secure the component to its housi…
Removing Rear Wheel from Peugeot Satelis 125
Satelis 125 In today's tutorial video, you will see how to remove the rear wheel from a Peugeot Satelis 125 scooter in simple steps. First, remove the exhaust fr…
How do you replace the gearbox oil of the Peugeot Satelis 125?
How do you replace the gearbox oil of the Peugeot Satelis 125?
Satelis 125 In order to replace the gearbox oil of the Peugeot Satelis 125, you need to loosen the drain plug of the transmission cup: this plug will be located …

Resetting the Service Light on an Aprilia Sportcity 200

In this guide, you will learn how to reset the maintenance service light for the engine oil change on the Aprilia Sportcity 200 scooter. First, place the scooter on the centre stand and press and hold the button on the right handlebar; then turn the ignition key to position one, waiting for the maintenance key light to reset completely, as shown in the video. At this point, turn off the ignition again and wait about ten seconds, then start the engine and check that the light has been reset!

Watch the video!


by ScegliAuto

More videos