Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the spark plug of the Peugeot Kisbee, you need to open the under-seat compartment so that you can loosen the screws that secure it to the corresponding front pin. Once it has been removed, you will need to loosen the screws that hold the inner lining of the under-seat compartment: this will allow you to locate the coil at the top of the engine block. You will need to disconnect it and remove the spark plug underneath using a socket wrench: now you can insert the new spark plug into its housing, repositioning the coil and other components.

Posted on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on the Peugeot Kisbee
How to Replace the Spark Plug on the Peugeot Kisbee
Kisbee This guide will show you how to remove and replace the spark plug on the Peugeot Kisbee by following these simple steps. First, place the scooter on …
How to Change the Engine Oil of the Peugeot Kisbee 50
How to Change the Engine Oil of the Peugeot Kisbee 50
Kisbee Here are the steps necessary to perform the routine maintenance service, replacing the engine oil and oil filter of the Peugeot Kisbee scooter. First…
How to Remove the Variator Cover from a Peugeot Kisbee
How to Remove the Variator Cover from a Peugeot Kisbee
Kisbee Before starting, dismount from your Peugeot Kisbee, position it on its central stand, and if possible, lift it. The variator cover is secured in plac…

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos