Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug on the Peugeot Kisbee

Model: Peugeot Kisbee
Part: Spark plugs

Video tutorial

This guide will show you how to remove and replace the spark plug on the Peugeot Kisbee by following these simple steps. First, place the scooter on its stand and open the seat; then remove the plastic cover located inside the under-seat compartment, as shown in the video.

At this point, disconnect the connector or the spark plug cap and use a socket wrench with an extension to unscrew and remove it; now replace it with a new one of the correct type and with the same heat rating, screwing it in by hand before tightening with the wrench!


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How do you replace the spark plug on the Peugeot Kisbee?
How do you replace the spark plug on the Peugeot Kisbee?
Kisbee To replace the spark plug of the Peugeot Kisbee, you need to open the under-seat compartment so that you can loosen the screws that secure it to the …
How to Remove the Variator Cover from a Peugeot Kisbee
How to Remove the Variator Cover from a Peugeot Kisbee
Kisbee Before starting, dismount from your Peugeot Kisbee, position it on its central stand, and if possible, lift it. The variator cover is secured in plac…
How do you replace the gearbox oil of the Peugeot Kisbee?
How do you replace the gearbox oil of the Peugeot Kisbee?
Kisbee In order to replace the gearbox oil of the Peugeot Kisbee, you must loosen the drain plug of the transmission housing: this plug will be located on t…

How to Replace the Thermostat on the Gasgas EC 300

This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bike on a stand and disconnect the radiator hose, draining the fluid into a container for about ten minutes; then unscrew the thermostat screws to remove it from the radiator, as shown in the video. At this point, install the new original thermostat valve, securing it to the radiator, then pour in the new coolant and start the engine to circulate it!

Watch the video!


by ScegliAuto

More videos