Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Air Filter on a Peugeot Citystar 125 Scooter

Model: Peugeot Citystar 125

Video tutorial

How to change the engine air filter on a Peugeot Citystar 125 scooter? Follow this guide to replace the filter. Position the scooter on the central stand, and using a screwdriver, unscrew the fastening screws of the air filter container (left side of the wheel).

After removing the fastening screws of the container, uncover the cap and remove the air filter. Soak the filter with suitable liquid.

Place the filter in the plastic container, close it; position the filter on the casing and tighten the screws with the screwdriver.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Engine Oil Change on Peugeot Citystar 125
Engine Oil Change on Peugeot Citystar 125
Citystar 125 In this video tutorial, you will see how to change the engine oil on a Peugeot Citystar 125. First, position your scooter upright on its stand: then,…
How to Replace the Air Filter on a Peugeot Citystar 125?
How to Replace the Air Filter on a Peugeot Citystar 125?
Citystar 125 To replace the air filter on the Peugeot Citystar 125, you need to loosen the screws that secure the respective cover located near the rear wheel on …
How to Replace the Fuel Pump Diaphragm on Peugeot Citystar 125
How to Replace the Fuel Pump Diaphragm on Peugeot Citystar 125
Citystar 125 In this tutorial video, see how to disassemble and replace the fuel pump diaphragm on the Peugeot Citystar 125 scooter. First, place your scooter on …

How to Replace the Headlight Bulbs on a Kawasaki ZX-10R

In this tutorial, you will see how to replace the headlight bulbs on a Kawasaki ZX-10R, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by locating the circular cap at the rear of the headlamp, then unscrew it and disconnect the power connector. Next, release the metal clip, extract the old bulb from the housing, and without touching the glass directly with your bare hands, insert the replacement. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos