Do it yourself
Frequently asked questions about cars and motorcycles
In this guide, you will find the instructions that will allow you to remove and replace the carburettor of the Peugeot Tweet 125 scooter. First, place the scooter on the centre stand and begin by opening the seat, then remove the plastic cover of the under-seat compartment; then disconnect the fuel line from the carburettor, followed by disconnecting the throttle cable and the manual choke cable. At this point, unscrew the clamp screw of the intake manifold, thus removing the carburettor; clean it or replace it with a new one!

Posted on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Tweet 125 To replace the transmission of the Peugeot Tweet 125, you need to loosen the screws that fix the panel covering the rear wheel, on the left side of i…
Tweet 125 Today's instructions will show us how to disassemble and replace the battery of the Peugeot Tweet 125 scooter, as well as the Tweet 50. First, we put…
Tweet 125 This guide shows you how to disassemble the front fork and replace the oil on the Peugeot Tweet 125 scooter. First, place the scooter on its centre s…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos