Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement on Peugeot Citystar 125

Model: Peugeot Citystar 125
Part: Battery

Video tutorial

After inserting the ignition key, lift the seat to open the compartment underneath. Next, open the plastic cover located at the bottom of the same compartment: use a flat screwdriver to lever at the upper joint of the plastic.

Detach the strap holding the battery cover in place, then unscrew the bolt for the negative terminal (always remove the negative first) and finally the positive terminal. Disconnect the small connector at the bottom and extract the battery by gripping it from the top. Insert the new battery and reassemble everything.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Indicator Bulb on a Peugeot Citystar 125?
How to Replace the Front Indicator Bulb on a Peugeot Citystar 125?
Citystar 125 To replace the front indicator bulb on the Peugeot Citystar 125, loosen the screws located on the inside of the front fairing, just below the handleb…
How to Replace the Shock Absorbers on the Peugeot Citystar 125?
How to Replace the Shock Absorbers on the Peugeot Citystar 125?
Citystar 125 To replace the rear shock absorbers on the Peugeot Citystar 125, first remove the underseat storage compartment. Loosen the fixing screws and detach …
How do you replace the front brake pads on the Peugeot Citystar 125?
How do you replace the front brake pads on the Peugeot Citystar 125?
Citystar 125 To replace the front brake pads of the Peugeot Citystar 125, you need to loosen the screws that secure the brake caliper to its housing: this will al…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos