How to Replace the Belt on Peugeot Jet Force 125

Model: Peugeot Jet Force 125
Part:

This video is currently unavailable

Discover the step-by-step instructions to remove and replace the belt on your Peugeot Jet Force 125 scooter by following these simple steps. First, place the scooter on its centre stand and start by unscrewing all the screws found on the sides of the transmission cover; then unscrew the central nut of the fan, followed by the nut of the clutch bell, as shown in the video.

At this point, remove and replace the belt with a new one of the correct type; insert it properly and reassemble the clutch cover!

Updated on 4 May 2026 by ScegliAuto

Related tutorials

How to Replace the Variator and Rollers of the Peugeot Jet Force 125

Jet Force 125 In this guide, see the instructions to remove and replace the variator and transmission rollers of the Peugeot Jet Force 125 scooter. First, place th…

How to Replace the Gearbox Oil on the Peugeot Jet Force 125

Jet Force 125 To replace the gearbox oil on the Peugeot Jet Force 125, completely remove the transmission cover located near the rear wheel on the left side of the…

How to Replace the Gear Oil on a Peugeot Jet Force 125?

Jet Force 125 The procedure for replacing the gear oil on a Peugeot Jet Force 125 involves completely removing the transmission cover located near the rear wheel o…

How to set the clock on a Yamaha V-Star 1300?

To set the clock on a Yamaha V-Star 1300, press and hold the RESET button and the SELECT button upwards, after turning on the ignition by turning the key. Once done, the hours will start to flash, allowing you to adjust them using the arrows above and below the SELECT button. When the correct hours are set, hold the RESET button, and the minutes will start to flash: these can now be adjusted in the same manner, before turning off the ignition.

Watch the video!

by ScegliAuto

How to Replace the Belt on Peugeot Jet Force 125

Related tutorials

How to set the clock on a Yamaha V-Star 1300?

More videos