Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install LED Bulbs on the Peugeot Speedfight 2

Model: Peugeot Speedfight 2
Part: Headlight bulb

Video tutorial

Today, in this guide, we will cover the main instructions for removing and replacing the LED bulbs in the front headlamp of the Peugeot Speedfight 2 scooter. First, place your scooter on its centre stand and begin unscrewing the fixing screws found on the sides of the headlamp plastics; then disconnect the electrical connector of the bulbs to remove it along with the front fairing, as shown in the video.

At this point, remove the old bulbs and replace them with the new LED ones, following the video tutorial to the end!


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to replace the rear tail section of the Peugeot Speedfight 2
How to replace the rear tail section of the Peugeot Speedfight 2
Speedfight 2 Today, we will see in this video tutorial how to remove and replace the tail section or rear fairing, along with the headlamp, of the Peugeot Speedfi…
How to Replace the Headlight Bulb of the Peugeot Speedfight 2
How to Replace the Headlight Bulb of the Peugeot Speedfight 2
Speedfight 2 In this guide, we will see the instructions that will allow you to disassemble and replace the headlight bulb of the Peugeot Speedfight 2 scooter. Fi…
How to Dismantle the Stator on a Peugeot Speedfight 2
How to Dismantle the Stator on a Peugeot Speedfight 2
Speedfight 2 Today, we will see in this video tutorial how to dismantle and replace the stator on a Peugeot Speedfight 2 scooter, following these simple steps. In…

How to Replace the Water Pump on a Gilera DNA 50

To replace the water pump on a Gilera DNA 50, you must completely disassemble the transmission cover along with the related components inside. On the left side of the cover, near the variator, you will find the water pump under its cover. By removing the screws that secure it from the inside, the old water pump can be taken out of its housing. After removal, insert the new spare part, reassemble the transmission, and all previously removed components.

Watch the video!


by ScegliAuto

More videos