Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Stator on a Peugeot Speedfight 2

Model: Peugeot Speedfight 2

Video tutorial

Today, we will see in this video tutorial how to dismantle and replace the stator on a Peugeot Speedfight 2 scooter, following these simple steps. In this case, the dismantling operation is performed with the engine removed from the body; therefore, once the rotor is removed, you can unscrew the fixing screws of the stator to remove it from the engine casing along with the electrical wiring, as shown in the video.

At this point, replace the component with the new one, using the original spare part; install the stator in the correct orientation, adjusting the timing at the end.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to remove the variator and clutch from a Peugeot Speedfight 2
How to remove the variator and clutch from a Peugeot Speedfight 2
Speedfight 2 In this guide, learn how to remove and replace various transmission components, including the variator, clutch, and belt, on the Peugeot Speedfight 2…
How to Remove the Air Filter Box on a Peugeot Speedfight 2
Speedfight 2 In this brief and simple guide, you will learn how to remove and replace the air filter on a Peugeot Speedfight 2 50cc scooter. First, place your sco…
How do you disassemble the engine of the Peugeot Speedfight 2?
How do you disassemble the engine of the Peugeot Speedfight 2?
Speedfight 2 It will be possible to disassemble the engine of the Peugeot Speedfight 2 by loosening the screws that fix it to the frame's housing in the center, a…

How to Change the Engine Oil of the Piaggio Liberty 125?

To change the engine oil of the Piaggio Liberty 125, loosen the oil drain plug located at the central lower area of the bike, near the exhaust. By unscrewing the plug, you can collect the used oil in a suitably positioned container. Above the drain plug, you will also find the oil filter, which needs to be removed from its housing and replaced with a new spare part. After the replacement, top up by adding oil through the designated breather.

Watch the video!


by ScegliAuto

More videos