Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil on the Peugeot Elyseo 125?
How to change the engine oil on the Peugeot Elyseo 125?
Elyseo 125 You can change the engine oil on the Peugeot Elyseo 125 by loosening the drain plug located at the central lower part of the scooter. Once this plug …
How do you replace the cylinder of the Peugeot Elyseo 125?
How do you replace the cylinder of the Peugeot Elyseo 125?
Elyseo 125 In order to replace the cylinder of the Peugeot Elyseo 125, you need to completely remove the engine block from its housing by loosening the screws t…
How to remove the variator from the Peugeot Elyseo 125
How to remove the variator from the Peugeot Elyseo 125
Elyseo 125 In this video tutorial, you will see how to disassemble and replace the variator of the Peugeot Elyseo 125 scooter by following these simple steps. F…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos