Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the variator from the Peugeot Elyseo 125

Model: Peugeot Elyseo 125
Part:

Video tutorial

In this video tutorial, you will see how to disassemble and replace the variator of the Peugeot Elyseo 125 scooter by following these simple steps. First, place your scooter on the centre stand and start by unscrewing the fixing screws of the transmission cover; then unscrew the nut of the fan and clutch bell, subsequently removing the belt as shown in the video.

At this point, remove and take out the variator, replacing the rollers if necessary; then reassemble everything by applying the reverse procedure of disassembly!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to replace the exhaust on a Peugeot Elyseo 125?
How to replace the exhaust on a Peugeot Elyseo 125?
Elyseo 125 You can replace the exhaust on a Peugeot Elyseo 125 by loosening the screws that secure it to its housing, located near the rear wheel on the right s…
How to Replace the Front Brake Pads on a Peugeot Elyseo 125
How to Replace the Front Brake Pads on a Peugeot Elyseo 125
Elyseo 125 This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre…
How to change the engine oil on the Peugeot Elyseo 125?
How to change the engine oil on the Peugeot Elyseo 125?
Elyseo 125 You can change the engine oil on the Peugeot Elyseo 125 by loosening the drain plug located at the central lower part of the scooter. Once this plug …

How to Change the Engine Oil on a Kawasaki Ninja 500?

This tutorial shows how to change the engine oil on a Kawasaki Ninja 500, a simple and quick task. First, wait for the engine to cool down sufficiently, then place a container underneath and remove the lower fairing. Next, locate the drain bolt, unscrew it using a 17mm hex key, and let all the oil drain from the system. Proceed by unscrewing the old filter, tightening the new one, and reassembling everything. Finally, pour in the new oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos