Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's guide will show you how to remove and replace the battery on the Peugeot Elyseo 125 scooter, as well as the 50. First, place the scooter on the centre stand and start unscrewing the screws from the plastic covers on the footboard to access the battery compartment; then disconnect both terminals (positive and negative), removing the old battery and replacing it with a new one, as shown in the video. At this point, install and connect the new battery (of the correct type and with the same amperage), refitting all the plastic covers!

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the variator from the Peugeot Elyseo 125
How to remove the variator from the Peugeot Elyseo 125
Elyseo 125 In this video tutorial, you will see how to disassemble and replace the variator of the Peugeot Elyseo 125 scooter by following these simple steps. F…
How to Replace the Spark Plug on a Peugeot Elyseo 125
How to Replace the Spark Plug on a Peugeot Elyseo 125
Elyseo 125 In this guide, we will go through the steps to remove and replace the spark plug on the engine of the Peugeot Elyseo 125 scooter. First, place the sc…
How to Replace the Front Brake Pads on a Peugeot Elyseo 125
How to Replace the Front Brake Pads on a Peugeot Elyseo 125
Elyseo 125 This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre…

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos