Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Maintenance Service on the Peugeot Django 125

Model: Peugeot Django 125
Part: Checks and maintenance

Video tutorial

Let's discover how to carry out the regular maintenance service by replacing the engine oil and air filter on the Peugeot Django 125 scooter. First, place the scooter on its centre stand and start unscrewing the screws of the air filter cover to remove and replace the cartridge with a new one. Next, unscrew the oil drain bolt, allowing the oil to drain into a container for about ten minutes, as shown in the video.

At this point, unscrew the filler cap and pour in the appropriate oil according to the engine specifications, and finally, perform all other necessary checks on the vehicle!


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Peugeot Django?
How to Reset the Service Light on a Peugeot Django?
Django 125 The scooter in question, for which we have a video presentation available, is the Peugeot Django 125, stylistically inspired by lines from the past. …
How to Replace the Belt on the Peugeot Django 125?
How to Replace the Belt on the Peugeot Django 125?
Django 125 You can replace the belt on the Peugeot Django 125 by loosening the screws that secure the cover to its housing, located near the rear wheel on the l…
How to Replace the Variator on a Peugeot Django 125
How to Replace the Variator on a Peugeot Django 125
Django 125 To replace the variator on a Peugeot Django 125, loosen the screws that secure the transmission cover, located near the rear wheel on the left side o…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos