Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Peugeot 106 key remote control

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Key

Today's instructions will guide us through the steps on how to disassemble and replace the battery of the key remote for the Peugeot 106. First, we take our remote and begin unscrewing the small screw with a crosshead screwdriver; then we open the remote to access the battery compartment, as shown in the video. Next, we remove the old battery and replace it with a new one of the correct type (in this case a CR 2016 3V); we install the new battery, making sure it is inserted correctly, and reassemble the two halves of the remote by tightening the small screw!

Posted on 23 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote battery on a Peugeot 106?
How to replace the remote battery on a Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) As shown in this tutorial, replacing the remote battery on a Peugeot 106 is a very simple and quick task. For this, you will need a small cross-head …
Where to Find the Fuses in a Peugeot 106
Where to Find the Fuses in a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) In this video, we will see where the fuse boxes are located in the Peugeot 106: the box inside the engine compartment is on the right side of the bat…
What is the Fuse Diagram and Where is the Fuse Box on a Peugeot 106?
What is the Fuse Diagram and Where is the Fuse Box on a Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) This article includes a video that describes the exact diagram and positioning of the fuses in your Peugeot 106. Fuses are designed to prevent damage…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos