Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Timing belt

To replace the timing belt of the Peugeot 208, you need to lift the car with a jack or a lift, so that the front right wheel is not in contact with the ground: this way you can loosen the bolts that secure the front right wheel and the inner lining of the corresponding wheel arch. At this point, you can loosen the central nut of the belt tensioner pulley so that the tension is reduced: the belt can be removed from its seat so that it can be replaced with a new spare part, making sure that everything works properly.

Posted on 10 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How and When to Replace the Timing Belt on the Peugeot 208 1.6 HDI
How and When to Replace the Timing Belt on the Peugeot 208 1.6 HDI
Peugeot 208 (2012-2019 / A9, MK 1) Today's guide provides the main instructions for removing and replacing the timing belt on the Peugeot 208 1.6 HDI; for this engine type, the manufac…
Guide to replacing the timing belt of the Peugeot 208 1.2
Guide to replacing the timing belt of the Peugeot 208 1.2
Peugeot 208 (2012-2019 / A9, MK 1) In this guide we will see the main instructions on how to dismantle and replace the timing belt of the Peugeot 208 1.2. First, lift the vehicle and s…
Replacing the Timing Belt on the Peugeot 208
Replacing the Timing Belt on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this video tutorial, you will learn how to remove and replace the timing belt on the Peugeot 208, following the instructions provided below. First…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos