Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light in the Peugeot 2008?

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part:

The monitoring of tire pressure is entrusted to specific sensors, which activate the alarm if this value is lower than normal because a tire is deflated or punctured. There are emergency equipment, such as the one shown in the video, which allows you to inflate the aforementioned tire to the values indicated by the manufacturer, then going to the workshop. The resetting of the aforementioned warning light is as follows: with the instrument panel on, press the button with the car symbol and access the Settings, choosing the Tires option and finally Reset.

Posted on 20 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Peugeot 2008?
How do you reset the tire pressure light on the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) To reset the tire pressure warning light of the Peugeot 200, you will need to inflate the tires until they reach the recommended pressure value: this…
How do you reset the tire pressure warning light on the Peugeot 2008?
How do you reset the tire pressure warning light on the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) To completely make the tire pressure warning light disappear from the instrument panel of the Peugeot 2008, you will need to turn on the instrument p…
How to reset the tire pressure sensor on the Peugeot 2008
How to reset the tire pressure sensor on the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) The following instructions will allow us to reset the tire pressure warning light on the Peugeot 2008; before resetting the TPMS sensors, it is neces…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos