Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights on the Peugeot 4008?

Model: Peugeot 4008 MK 1 - Years 2012-2017
Part: Tail light

In this tutorial we can see how to replace the rear lights on the Peugeot 4008, an extremely simple and fast operation. First of all, make sure that the key is not inserted, then open the trunk door, locate the two screws along the inner edge of the headlight in question and unscrew them using a simple screwdriver with a cross tip. Then lever with a plastic spatula along the perimeter of the headlight, separate it from the bodywork and disconnect the power connector. To install the replacement, just follow the reverse procedure.

Posted on 16 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter in the Peugeot 4008?
How to replace the cabin filter in the Peugeot 4008?
Peugeot 4008 (2012-2017 / MK 1) In this tutorial, we will see how to replace the cabin filter in the Peugeot 4008, a very simple and quick operation. First, let's go to the passenge…
What is the fuse layout of the Peugeot 4008?
What is the fuse layout of the Peugeot 4008?
Peugeot 4008 (2012-2017 / MK 1) In this video we can see where the fuse boxes of the Peugeot 4008 are located and what are the respective diagrams, to consult in case we need to che…
What is the fuse diagram for the Peugeot 4008?
What is the fuse diagram for the Peugeot 4008?
Peugeot 4008 (2012-2017 / MK 1) In this video, you can see where the fuse boxes are located in the Peugeot 4008 and their respective diagrams, useful in case you need to check the f…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos