Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Reservoir on the Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Antifreeze coolant

Video tutorial

Today, you will learn how to replace the coolant reservoir on the Peugeot 207. The first step is to open the front bonnet of the vehicle. Next, cut the tie that secures the hose of the reservoir to move it and access the reservoir.

The second step is to disconnect the reservoir hose and use a flathead screwdriver to disconnect the connector. The third step is to lift the reservoir without removing it completely, as you will need to disconnect the hose first.

The fourth step is to remove the reservoir, clean the housing, and insert the new reservoir. The fifth step is to connect the hose to the reservoir and also the upper hose.

The sixth step is to connect the connector and reposition the hose using the tie. Finally, complete the replacement by topping up the fluid inside.


Updated on 8 November 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant in a Peugeot 207?
How to Replace the Coolant in a Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the coolant in a Peugeot 207, open the bonnet to access the components inside the engine bay. Specifically, you need to access the rear of…
How to Replace the Coolant in the Peugeot 207 1.6
How to Replace the Coolant in the Peugeot 207 1.6
Peugeot 207 (2006-2015 / MK 1) Let’s briefly review the steps to replace the coolant in the Peugeot 207 with a 1.6 petrol engine. First, drain the coolant by disconnecting the hose…
How to Replace the Coolant in a Peugeot 207
How to Replace the Coolant in a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To replace the coolant in a Peugeot 207, open the bonnet and disconnect the car battery. Open the cap of the coolant reservoir and lift the 207 with …

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos