Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

Video tutorial

To replace the coolant in a Peugeot 207, open the bonnet and disconnect the car battery. Open the cap of the coolant reservoir and lift the 207 with a jack and axle stands.

Now, using a flat screwdriver, unscrew the clamp on the cooling hose connected to the radiator and remove it, allowing the coolant to drain completely. Once the fluid has finished draining, reconnect the hose and re-tighten the clamp, lower the car, and begin adding the new coolant.

Once filled, remove the air box to access the bleed screw. Remove the sensor from the air box and the duct, take out the air box, and open the bleed screws in the cooling system until fluid flows through the bleed and there are no more air bubbles.

Then close the screws and reassemble everything.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant in a Peugeot 207?
How to Replace the Coolant in a Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the coolant in a Peugeot 207, open the bonnet to access the components inside the engine bay. Specifically, you need to access the rear of…
How to Replace the Coolant in the Peugeot 207 1.6
How to Replace the Coolant in the Peugeot 207 1.6
Peugeot 207 (2006-2015 / MK 1) Let’s briefly review the steps to replace the coolant in the Peugeot 207 with a 1.6 petrol engine. First, drain the coolant by disconnecting the hose…
How to Replace the Coolant in a Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) .. In this tutorial, see how to replace the coolant in a Peugeot 207, a very simple and quick operation. Before proceeding, ensure.. …

    Frequently Asked Questions

    • 207 2006-2015 - Where is the Peugeot 207 oil pressure sensor located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos