Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the radiator of the Peugeot 207 without removing the bumper

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Radiator

Video tutorial

In this video, we see how to remove the radiator of the Peugeot 207 without needing to remove the entire front bumper, as is usually the case. In fact, if we take our car to a radiator specialist, they will give us an astronomical quote, including two hours for removing the bumper to then remove the radiator.

Here, instead, we see how it is possible to remove it without losing all this time. Of course, we must disconnect the water outlet pipes, then we must lever between the front of the car and the radiator itself with a screwdriver, first on one side and then on the other.

When we feel that it has come off - as much as it must be changed - we pull it up towards us, and it's done. All that's left is to put the new one in its place.


Posted on 16 November 2025 by ScegliAuto


Related tutorials

How to replace the radiator of the Peugeot 207
How to replace the radiator of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Today we will explain how to replace the radiator of the Peugeot 207 on your own. The radiator of the Peugeot 207 is located on the front of the car,…
How do you replace the radiator of the Peugeot 207?
How do you replace the radiator of the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) It will be possible to replace the radiator of the Peugeot 207 by opening the hood, so that the fixing screws of the bumper can be loosened: these wi…
How to Remove the Rear Bumper of a Peugeot 207
How to Remove the Rear Bumper of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Today's steps will show you how to remove and replace the rear bumper of a Peugeot 207, following the instructions below. First, move to the rear and…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos