Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper of a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Rear bumper

Video tutorial

Today's steps will show you how to remove and replace the rear bumper of a Peugeot 207, following the instructions below. First, move to the rear and open the boot lid; then unscrew the plastic screw of the light and disconnect the electrical connector of the bulbs to remove the lights, as shown in the video.

At this point, remove all the plastic clips of the bumper, detaching it from the sides until it is completely removed; install the new rear bumper by applying the reverse procedure!


Updated on 3 October 2026 by ScegliAuto


Related tutorials

Peugeot 207 (2006-2015 / MK 1) In this video, we will see how to remove the rear bumper on a Peugeot 207 in simple steps. First, open the boot lid and start by removing the rear li…
Peugeot 207 (2006-2015 / MK 1) Are we determined to independently remove the bumper from our Peugeot 207? No problem, we will do it by following the video uploaded here: The first …
Peugeot 207 (2006-2015 / MK 1) Today, let's look at the procedure for removing and replacing the front bumper of a Peugeot 207. First, open the bonnet and start unscrewing all the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos